* Sea-Bird SBE 9 Data File:
* FileName = C:\Program Files\Sea-Bird\SeasaveV7\BP-TN05-SS07.hex
* Software Version Seasave V 7.12
* Temperature SN = 5284
* Conductivity SN = 3727
* Number of Bytes Per Scan = 24
* Number of Voltage Words = 4
* Number of Scans Averaged by the Deck Unit = 1
* System UpLoad Time = Jul 26 2010 07:18:44
** Ship: FERREL
** Station: BP-TN05-SS07-W-S
** Operator: EB
# nquan = 17
# nvalues = 0                                     
# units = specified
# name 0 = t090C: Temperature [ITS-90, deg C]
# name 1 = prDM: Pressure, Digiquartz [db]
# name 2 = sbeox0V: Oxygen raw, SBE 43 [V]
# name 3 = wetCDOM: Fluorescence, WET Labs CDOM [mg/m^3]
# name 4 = v1: Voltage 1
# name 5 = v2: Voltage 2
# name 6 = v3: Voltage 3
# name 7 = c0S/m: Conductivity [S/m]
# name 8 = depSM: Depth [salt water, m]
# name 9 = sal00: Salinity, Practical [PSU]
# name 10 = density00: Density [density, Kg/m^3]
# name 11 = svCM: Sound Velocity [Chen-Millero, m/s]
# name 12 = sbeox0ML/L: Oxygen, SBE 43 [ml/l]
# name 13 = sbeox0Mg/L: Oxygen, SBE 43 [mg/l]
# name 14 = scan: Scan Count
# name 15 = nbf: Bottles Fired
# name 16 = flag:  0.000e+00
# interval = seconds: 0.0416667
# start_time = Jul 26 2010 07:18:44
# bad_flag = -9.990e-29
# <Sensors count="11" >
#   <sensor Channel="1" >
#     <!-- Frequency 0, Temperature -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>5284</SerialNumber>
#       <CalibrationDate>18-May-10 </CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.38383890e-003</G>
#       <H>6.41291933e-004</H>
#       <I>2.23149523e-005</I>
#       <J>1.96196243e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="2" >
#     <!-- Frequency 1, Conductivity -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>3727</SerialNumber>
#       <CalibrationDate>18-May-10 </CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-1.02103088e+001</G>
#         <H>1.25339760e+000</H>
#         <I>-1.77138278e-003</I>
#         <J>1.81743574e-004</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="3" >
#     <!-- Frequency 2, Pressure, Digiquartz with TC -->
#     <PressureSensor SensorID="45" >
#       <SerialNumber>0967</SerialNumber>
#       <CalibrationDate>21-May-10 </CalibrationDate>
#       <C1>-4.235585e+004</C1>
#       <C2>-1.547494e-001</C2>
#       <C3>1.379190e-002</C3>
#       <D1>3.520200e-002</D1>
#       <D2>0.000000e+000</D2>
#       <T1>2.992426e+001</T1>
#       <T2>-3.024550e-004</T2>
#       <T3>4.266690e-006</T3>
#       <T4>2.650170e-009</T4>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#       <T5>0.000000e+000</T5>
#       <AD590M>1.281600e-002</AD590M>
#       <AD590B>-9.071980e+000</AD590B>
#     </PressureSensor>
#   </sensor>
#   <sensor Channel="4" >
#     <!-- A/D voltage 0, Oxygen, SBE 43 -->
#     <OxygenSensor SensorID="38" >
#       <SerialNumber>1832</SerialNumber>
#       <CalibrationDate>19-May-10p</CalibrationDate>
#       <Use2007Equation>1</Use2007Equation>
#       <CalibrationCoefficients equation="0" >
#         <!-- Coefficients for Owens-Millard equation. -->
#         <Boc>0.0000</Boc>
#         <Soc>0.0000e+000</Soc>
#         <offset>0.0000</offset>
#         <Pcor>0.00e+000</Pcor>
#         <Tcor>0.0000</Tcor>
#         <Tau>0.0</Tau>
#       </CalibrationCoefficients>
#       <CalibrationCoefficients equation="1" >
#         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and later. -->
#         <Soc>5.0160e-001</Soc>
#         <offset>-0.5385</offset>
#         <A>-2.9778e-003</A>
#         <B> 1.6250e-004</B>
#         <C>-3.0255e-006</C>
#         <D0> 2.5826e+000</D0>
#         <D1> 1.92630e-004</D1>
#         <D2>-4.64800e-002</D2>
#         <E> 3.6000e-002</E>
#         <Tau20> 1.5000</Tau20>
#         <H1>-3.3000e-002</H1>
#         <H2> 5.0000e+003</H2>
#         <H3> 1.4500e+003</H3>
#       </CalibrationCoefficients>
#     </OxygenSensor>
#   </sensor>
#   <sensor Channel="5" >
#     <!-- A/D voltage 1, Free -->
#   </sensor>
#   <sensor Channel="6" >
#     <!-- A/D voltage 2, pH -->
#     <pH_Sensor SensorID="43" >
#       <SerialNumber>0771</SerialNumber>
#       <CalibrationDate>21-May-10 </CalibrationDate>
#       <Slope>4.5727</Slope>
#       <Offset>2.5020</Offset>
#     </pH_Sensor>
#   </sensor>
#   <sensor Channel="7" >
#     <!-- A/D voltage 3, Free -->
#   </sensor>
#   <sensor Channel="8" >
#     <!-- A/D voltage 4, Fluorometer, WET Labs CDOM -->
#     <FluoroWetlabCDOM_Sensor SensorID="19" >
#       <SerialNumber>1878</SerialNumber>
#       <CalibrationDate>6/10/2010</CalibrationDate>
#       <ScaleFactor>25.000</ScaleFactor>
#       <Vblank>0.065</Vblank>
#     </FluoroWetlabCDOM_Sensor>
#   </sensor>
#   <sensor Channel="9" >
#     <!-- A/D voltage 5, Free -->
#   </sensor>
#   <sensor Channel="10" >
#     <!-- A/D voltage 6, Altimeter -->
#     <AltimeterSensor SensorID="0" >
#       <SerialNumber>50082</SerialNumber>
#       <CalibrationDate>24-May-10</CalibrationDate>
#       <ScaleFactor>15.000</ScaleFactor>
#       <Offset>0.000</Offset>
#     </AltimeterSensor>
#   </sensor>
#   <sensor Channel="11" >
#     <!-- A/D voltage 7, Free -->
#   </sensor>
# </Sensors>
# datcnv_date = Jul 29 2010 12:59:04, 7.20f
# datcnv_in = R:\DWH_Data\Ferrel\Cruise_03\Data_Collection\CTD\2010_0727_BP-TN05-SS08\BP-TN05-SS08.hex R:\DWH_Data\Ferrel\Cruise_03\Data_Collection\CTD\2010_0727_BP-TN05-SS08\BP-TN05-SS08.con
# datcnv_ox_hysteresis_correction = yes
# datcnv_ox_tau_correction = yes
# datcnv_bottle_scan_range_source = BL file
# datcnv_scans_per_bottle = 49
*END*