* Sea-Bird SBE 9 Data File:
* FileName = C:\CTD\SBE-9\Data\Year_10\GU1004\009.dat
* Software Version Seasave Win32 V 5.39c
* Temperature SN = 0524
* Conductivity SN = 3487
* Number of Bytes Per Scan = 27
* Number of Voltage Words = 3
* Number of Scans Averaged by the Deck Unit = 1
* System UpLoad Time = Aug 27 2010 19:22:44
* NMEA Latitude = 29 25.91 N
* NMEA Longitude = 094 30.42 W
* NMEA UTC (Time) = Aug 27 2010  19:22:38
* Store Lat/Lon Data = Add to Header Only
** Ship:   GORDON GUNTER
** Cruise: 1004
** Station:    009
** Latitude:   29 25.938N
** Longitude:  094 30.430W
** Cast: 01
** SEAMAP Station Number: B220
** Operator's Initials: AFM
** Depth (meters): 10.8
# nquan = 15
# nvalues = 8                           
# units = specified
# name 0 = t090C: Temperature [ITS-90, deg C]
# name 1 = prDM: Pressure, Digiquartz [db]
# name 2 = sbeox0V: Oxygen raw, SBE 43 [V]
# name 3 = wetStar: Fluorescence, WET Labs WETstar [mg/m^3]
# name 4 = v1: Voltage 1
# name 5 = v2: Voltage 2
# name 6 = v3: Voltage 3
# name 7 = c0S/m: Conductivity [S/m]
# name 8 = depSM: Depth [salt water, m]
# name 9 = sal00: Salinity, Practical [PSU]
# name 10 = density00: Density [density, Kg/m^3]
# name 11 = svCM: Sound Velocity [Chen-Millero, m/s]
# name 12 = sbeox0Mg/L: Oxygen, SBE 43 [mg/l]
# name 13 = sbeox0ML/L: Oxygen, SBE 43 [ml/l]
# name 14 = flag: flag
# span 0 =    30.2485,    30.5122       
# span 1 =      2.000,      9.000       
# span 2 =     2.5499,     2.7005       
# span 3 =     6.2293,     8.6792       
# span 4 =     0.0000,     0.0000       
# span 5 =     2.4789,     2.7031       
# span 6 =     0.0000,     0.0000       
# span 7 =   5.732457,   5.755501       
# span 8 =      1.986,      8.939       
# span 9 =    34.0364,    34.1252       
# span 10 =  1020.8479,  1021.0241      
# span 11 =    1545.37,    1545.76      
# span 12 =    6.32750,    6.79190      
# span 13 =    4.42761,    4.75257      
# span 14 = 0.0000e+00, 0.0000e+00      
# interval = decibars: 1                
# start_time = Aug 27 2010 19:22:38
# bad_flag = -9.990e-29
# <Sensors count="11" >
#   <sensor Channel="1" >
#     <!-- Frequency 0, Temperature -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>0524</SerialNumber>
#       <CalibrationDate>15 jul 2010</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.36427749e-003</G>
#       <H>6.34567918e-004</H>
#       <I>2.12958443e-005</I>
#       <J>1.88147563e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="2" >
#     <!-- Frequency 1, Conductivity -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>3487</SerialNumber>
#       <CalibrationDate>15 jul 2010</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-9.89060332e+000</G>
#         <H>1.49272282e+000</H>
#         <I>-1.33234489e-003</I>
#         <J>1.77941691e-004</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="3" >
#     <!-- Frequency 2, Pressure, Digiquartz with TC -->
#     <PressureSensor SensorID="45" >
#       <SerialNumber>0916</SerialNumber>
#       <CalibrationDate>21 jul 2010</CalibrationDate>
#       <C1>-4.112913e+004</C1>
#       <C2>9.700870e-002</C2>
#       <C3>1.190660e-002</C3>
#       <D1>3.551800e-002</D1>
#       <D2>0.000000e+000</D2>
#       <T1>2.991477e+001</T1>
#       <T2>-3.112270e-004</T2>
#       <T3>4.015030e-006</T3>
#       <T4>3.176540e-009</T4>
#       <Slope>1.00002000</Slope>
#       <Offset>-0.60510</Offset>
#       <T5>0.000000e+000</T5>
#       <AD590M>1.280470e-002</AD590M>
#       <AD590B>-9.538050e+000</AD590B>
#     </PressureSensor>
#   </sensor>
#   <sensor Channel="4" >
#     <!-- Frequency 3, Temperature, 2 -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>5039</SerialNumber>
#       <CalibrationDate>15 jul 2010</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.34468855e-003</G>
#       <H>6.37243535e-004</H>
#       <I>2.13522776e-005</I>
#       <J>1.90552521e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="5" >
#     <!-- Frequency 4, Conductivity, 2 -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>3497</SerialNumber>
#       <CalibrationDate>15 jul 2010</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-1.00538186e+001</G>
#         <H>1.54551771e+000</H>
#         <I>-2.45304282e-003</I>
#         <J>2.75093949e-004</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="6" >
#     <!-- A/D voltage 0, Oxygen, SBE 43 -->
#     <OxygenSensor SensorID="38" >
#       <SerialNumber>1904</SerialNumber>
#       <CalibrationDate>24 jul 2010</CalibrationDate>
#       <Use2007Equation>0</Use2007Equation>
#       <CalibrationCoefficients equation="0" >
#         <!-- Coefficients for Owens-Millard equation. -->
#         <Boc>0.0000</Boc>
#         <Soc>5.0350e-001</Soc>
#         <offset>-0.4802</offset>
#         <Pcor>1.35e-004</Pcor>
#         <Tcor>-0.0007</Tcor>
#         <Tau>0.0</Tau>
#       </CalibrationCoefficients>
#       <CalibrationCoefficients equation="1" >
#         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and later. -->
#         <Soc>4.5930e-001</Soc>
#         <offset>-0.6346</offset>
#         <A>-8.4553e-003</A>
#         <B> 3.6898e-004</B>
#         <C>-4.3842e-006</C>
#         <D0> 2.5826e+000</D0>
#         <D1> 1.92630e-004</D1>
#         <D2>-4.64800e-002</D2>
#         <E> 3.6000e-002</E>
#         <Tau20> 1.7800</Tau20>
#         <H1>-3.3000e-002</H1>
#         <H2> 5.0000e+003</H2>
#         <H3> 1.4500e+003</H3>
#       </CalibrationCoefficients>
#     </OxygenSensor>
#   </sensor>
#   <sensor Channel="7" >
#     <!-- A/D voltage 1, Free -->
#   </sensor>
#   <sensor Channel="8" >
#     <!-- A/D voltage 2, Oxygen, SBE 43, 2 -->
#     <OxygenSensor SensorID="38" >
#       <SerialNumber>1893</SerialNumber>
#       <CalibrationDate>24 jul 2010</CalibrationDate>
#       <Use2007Equation>0</Use2007Equation>
#       <CalibrationCoefficients equation="0" >
#         <!-- Coefficients for Owens-Millard equation. -->
#         <Boc>0.0000</Boc>
#         <Soc>4.5870e-001</Soc>
#         <offset>-0.4615</offset>
#         <Pcor>1.35e-004</Pcor>
#         <Tcor>0.0002</Tcor>
#         <Tau>0.0</Tau>
#       </CalibrationCoefficients>
#       <CalibrationCoefficients equation="1" >
#         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and later. -->
#         <Soc>5.0470e-001</Soc>
#         <offset>-0.4935</offset>
#         <A>-3.7372e-003</A>
#         <B> 2.2198e-004</B>
#         <C>-4.3452e-006</C>
#         <D0> 2.5826e+000</D0>
#         <D1> 1.92630e-004</D1>
#         <D2>-4.64800e-002</D2>
#         <E> 3.6000e-002</E>
#         <Tau20> 1.3100</Tau20>
#         <H1>-3.3000e-002</H1>
#         <H2> 5.0000e+003</H2>
#         <H3> 1.4500e+003</H3>
#       </CalibrationCoefficients>
#     </OxygenSensor>
#   </sensor>
#   <sensor Channel="9" >
#     <!-- A/D voltage 3, Free -->
#   </sensor>
#   <sensor Channel="10" >
#     <!-- A/D voltage 4, Transmissometer, Chelsea/Seatech/WET Lab CStar -->
#     <TransChelseaSeatechWetlabCStarSensor SensorID="59" >
#       <SerialNumber>CST-427PR</SerialNumber>
#       <CalibrationDate>25-Mar-2010</CalibrationDate>
#       <M>23.1273</M>
#       <B>-1.2951</B>
#       <PathLength>0.250</PathLength>
#     </TransChelseaSeatechWetlabCStarSensor>
#   </sensor>
#   <sensor Channel="11" >
#     <!-- A/D voltage 5, Fluorometer, WET Labs WETstar -->
#     <FluoroWetlabWetstarSensor SensorID="21" >
#       <SerialNumber></SerialNumber>
#       <CalibrationDate>4-Feb-2010</CalibrationDate>
#       <ScaleFactor>14.900</ScaleFactor>
#       <Vblank>0.058</Vblank>
#     </FluoroWetlabWetstarSensor>
#   </sensor>
# </Sensors>
# datcnv_date = Jan 14 2011 10:47:22, 7.20f
# datcnv_in = R:\DWH_Data\Gordon_Gunter\Cruise_08\DataCollection\CTD\SBE-9\2010_0827\009.dat R:\DWH_Data\Gordon_Gunter\Cruise_08\DataCollection\CTD\SBE-9\2010_0827\009.CON
# datcnv_skipover = 0
# datcnv_ox_hysteresis_correction = no
# datcnv_ox_tau_correction = yes
# wildedit_date = Jan 14 2011 10:47:49, 7.20f
# wildedit_in = R:\DWH_Working\Processed_Data\CTD\Gordon_Gunter\Cruise_08\2010_0827_009\009.cnv
# wildedit_pass1_nstd = 2.0
# wildedit_pass2_nstd = 20.0
# wildedit_pass2_mindelta = 0.000e+000
# wildedit_npoint = 100
# wildedit_vars = t090C prDM sal00
# wildedit_excl_bad_scans = yes
# binavg_date = Jan 14 2011 10:48:13, 7.20f
# binavg_in = R:\DWH_Working\Processed_Data\CTD\Gordon_Gunter\Cruise_08\2010_0827_009\009_edit.cnv
# binavg_bintype = decibars
# binavg_binsize = 1
# binavg_excl_bad_scans = yes
# binavg_skipover = 0
# binavg_surface_bin = no, min = 0.000, max = 0.000, value = 0.000
# file_type = ascii
*END*
    30.5113      2.000     2.5499     6.2293     0.0000     2.7031     0.0000   5.755501      1.986    34.0971  1020.8829    1545.76    6.32750    4.42761 0.0000e+00
    30.4965      3.000     2.6887     7.2979     0.0000     2.5977     0.0000   5.745859      2.980    34.0428  1020.8517    1545.69    6.75573    4.72726 0.0000e+00
    30.5087      4.000     2.6976     7.5602     0.0000     2.5944     0.0000   5.746400      3.973    34.0377  1020.8479    1545.73    6.78268    4.74612 0.0000e+00
    30.5122      5.000     2.7005     7.2153     0.0000     2.5966     0.0000   5.746614      4.966    34.0364  1020.8500    1545.75    6.79190    4.75257 0.0000e+00
    30.4765      6.000     2.6974     7.0652     0.0000     2.5932     0.0000   5.742985      5.959    34.0368  1020.8669    1545.69    6.78766    4.74960 0.0000e+00
    30.4005      7.000     2.6911     7.9671     0.0000     2.5858     0.0000   5.738141      6.953    34.0573  1020.9126    1545.58    6.77679    4.74200 0.0000e+00
    30.3395      8.000     2.6651     8.6792     0.0000     2.5613     0.0000   5.736334      7.946    34.0876  1020.9605    1545.50    6.70361    4.69079 0.0000e+00
    30.2485      9.000     2.5783     6.9929     0.0000     2.4789     0.0000   5.732457      8.939    34.1252  1021.0241    1545.37    6.44665    4.51098 0.0000e+00