* Sea-Bird SBE 9 Data File:
* FileName = C:\CTD\SBE-9\Data\Year_10\GU1004\017.dat
* Software Version Seasave Win32 V 5.39c
* Temperature SN = 0524
* Conductivity SN = 3487
* Number of Bytes Per Scan = 27
* Number of Voltage Words = 3
* Number of Scans Averaged by the Deck Unit = 1
* System UpLoad Time = Aug 29 2010 02:21:13
* NMEA Latitude = 29 31.95 N
* NMEA Longitude = 093 31.95 W
* NMEA UTC (Time) = Aug 29 2010  02:21:07
* Store Lat/Lon Data = Add to Header Only
** Ship:   GORDON GUNTER
** Cruise: 1004
** Station:    017
** Latitude:   29 31.962N
** Longitude:  093 31.961W
** Cast: 01
** SEAMAP Station Number: B212
** Operator's Initials: AFM
** Depth (meters): 11.5
# nquan = 15
# nvalues = 8                           
# units = specified
# name 0 = t090C: Temperature [ITS-90, deg C]
# name 1 = prDM: Pressure, Digiquartz [db]
# name 2 = sbeox0V: Oxygen raw, SBE 43 [V]
# name 3 = wetStar: Fluorescence, WET Labs WETstar [mg/m^3]
# name 4 = v1: Voltage 1
# name 5 = v2: Voltage 2
# name 6 = v3: Voltage 3
# name 7 = c0S/m: Conductivity [S/m]
# name 8 = depSM: Depth [salt water, m]
# name 9 = sal00: Salinity, Practical [PSU]
# name 10 = density00: Density [density, Kg/m^3]
# name 11 = svCM: Sound Velocity [Chen-Millero, m/s]
# name 12 = sbeox0Mg/L: Oxygen, SBE 43 [mg/l]
# name 13 = sbeox0ML/L: Oxygen, SBE 43 [ml/l]
# name 14 = flag: flag
# span 0 =    30.1699,    30.2710       
# span 1 =      3.000,     10.000       
# span 2 =     2.4026,     2.6098       
# span 3 =     4.5856,     5.7174       
# span 4 =     0.0000,     0.0000       
# span 5 =     2.3360,     2.5042       
# span 6 =     0.0000,     0.0000       
# span 7 =   5.376067,   5.386568       
# span 8 =      2.980,      9.932       
# span 9 =    31.7408,    31.8684       
# span 10 =  1019.2086,  1019.3658      
# span 11 =    1542.82,    1542.95      
# span 12 =    5.97780,    6.62136      
# span 13 =    4.18291,    4.63324      
# span 14 = 0.0000e+00, 0.0000e+00      
# interval = decibars: 1                
# start_time = Aug 29 2010 02:21:07
# bad_flag = -9.990e-29
# <Sensors count="11" >
#   <sensor Channel="1" >
#     <!-- Frequency 0, Temperature -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>0524</SerialNumber>
#       <CalibrationDate>15 jul 2010</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.36427749e-003</G>
#       <H>6.34567918e-004</H>
#       <I>2.12958443e-005</I>
#       <J>1.88147563e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="2" >
#     <!-- Frequency 1, Conductivity -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>3487</SerialNumber>
#       <CalibrationDate>15 jul 2010</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-9.89060332e+000</G>
#         <H>1.49272282e+000</H>
#         <I>-1.33234489e-003</I>
#         <J>1.77941691e-004</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="3" >
#     <!-- Frequency 2, Pressure, Digiquartz with TC -->
#     <PressureSensor SensorID="45" >
#       <SerialNumber>0916</SerialNumber>
#       <CalibrationDate>21 jul 2010</CalibrationDate>
#       <C1>-4.112913e+004</C1>
#       <C2>9.700870e-002</C2>
#       <C3>1.190660e-002</C3>
#       <D1>3.551800e-002</D1>
#       <D2>0.000000e+000</D2>
#       <T1>2.991477e+001</T1>
#       <T2>-3.112270e-004</T2>
#       <T3>4.015030e-006</T3>
#       <T4>3.176540e-009</T4>
#       <Slope>1.00002000</Slope>
#       <Offset>-0.60510</Offset>
#       <T5>0.000000e+000</T5>
#       <AD590M>1.280470e-002</AD590M>
#       <AD590B>-9.538050e+000</AD590B>
#     </PressureSensor>
#   </sensor>
#   <sensor Channel="4" >
#     <!-- Frequency 3, Temperature, 2 -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>5039</SerialNumber>
#       <CalibrationDate>15 jul 2010</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.34468855e-003</G>
#       <H>6.37243535e-004</H>
#       <I>2.13522776e-005</I>
#       <J>1.90552521e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="5" >
#     <!-- Frequency 4, Conductivity, 2 -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>3497</SerialNumber>
#       <CalibrationDate>15 jul 2010</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-1.00538186e+001</G>
#         <H>1.54551771e+000</H>
#         <I>-2.45304282e-003</I>
#         <J>2.75093949e-004</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="6" >
#     <!-- A/D voltage 0, Oxygen, SBE 43 -->
#     <OxygenSensor SensorID="38" >
#       <SerialNumber>1904</SerialNumber>
#       <CalibrationDate>24 jul 2010</CalibrationDate>
#       <Use2007Equation>0</Use2007Equation>
#       <CalibrationCoefficients equation="0" >
#         <!-- Coefficients for Owens-Millard equation. -->
#         <Boc>0.0000</Boc>
#         <Soc>5.0350e-001</Soc>
#         <offset>-0.4802</offset>
#         <Pcor>1.35e-004</Pcor>
#         <Tcor>-0.0007</Tcor>
#         <Tau>0.0</Tau>
#       </CalibrationCoefficients>
#       <CalibrationCoefficients equation="1" >
#         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and later. -->
#         <Soc>4.5930e-001</Soc>
#         <offset>-0.6346</offset>
#         <A>-8.4553e-003</A>
#         <B> 3.6898e-004</B>
#         <C>-4.3842e-006</C>
#         <D0> 2.5826e+000</D0>
#         <D1> 1.92630e-004</D1>
#         <D2>-4.64800e-002</D2>
#         <E> 3.6000e-002</E>
#         <Tau20> 1.7800</Tau20>
#         <H1>-3.3000e-002</H1>
#         <H2> 5.0000e+003</H2>
#         <H3> 1.4500e+003</H3>
#       </CalibrationCoefficients>
#     </OxygenSensor>
#   </sensor>
#   <sensor Channel="7" >
#     <!-- A/D voltage 1, Free -->
#   </sensor>
#   <sensor Channel="8" >
#     <!-- A/D voltage 2, Oxygen, SBE 43, 2 -->
#     <OxygenSensor SensorID="38" >
#       <SerialNumber>1893</SerialNumber>
#       <CalibrationDate>24 jul 2010</CalibrationDate>
#       <Use2007Equation>0</Use2007Equation>
#       <CalibrationCoefficients equation="0" >
#         <!-- Coefficients for Owens-Millard equation. -->
#         <Boc>0.0000</Boc>
#         <Soc>4.5870e-001</Soc>
#         <offset>-0.4615</offset>
#         <Pcor>1.35e-004</Pcor>
#         <Tcor>0.0002</Tcor>
#         <Tau>0.0</Tau>
#       </CalibrationCoefficients>
#       <CalibrationCoefficients equation="1" >
#         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and later. -->
#         <Soc>5.0470e-001</Soc>
#         <offset>-0.4935</offset>
#         <A>-3.7372e-003</A>
#         <B> 2.2198e-004</B>
#         <C>-4.3452e-006</C>
#         <D0> 2.5826e+000</D0>
#         <D1> 1.92630e-004</D1>
#         <D2>-4.64800e-002</D2>
#         <E> 3.6000e-002</E>
#         <Tau20> 1.3100</Tau20>
#         <H1>-3.3000e-002</H1>
#         <H2> 5.0000e+003</H2>
#         <H3> 1.4500e+003</H3>
#       </CalibrationCoefficients>
#     </OxygenSensor>
#   </sensor>
#   <sensor Channel="9" >
#     <!-- A/D voltage 3, Free -->
#   </sensor>
#   <sensor Channel="10" >
#     <!-- A/D voltage 4, Transmissometer, Chelsea/Seatech/WET Lab CStar -->
#     <TransChelseaSeatechWetlabCStarSensor SensorID="59" >
#       <SerialNumber>CST-427PR</SerialNumber>
#       <CalibrationDate>25-Mar-2010</CalibrationDate>
#       <M>23.1273</M>
#       <B>-1.2951</B>
#       <PathLength>0.250</PathLength>
#     </TransChelseaSeatechWetlabCStarSensor>
#   </sensor>
#   <sensor Channel="11" >
#     <!-- A/D voltage 5, Fluorometer, WET Labs WETstar -->
#     <FluoroWetlabWetstarSensor SensorID="21" >
#       <SerialNumber></SerialNumber>
#       <CalibrationDate>4-Feb-2010</CalibrationDate>
#       <ScaleFactor>14.900</ScaleFactor>
#       <Vblank>0.058</Vblank>
#     </FluoroWetlabWetstarSensor>
#   </sensor>
# </Sensors>
# datcnv_date = Jan 14 2011 12:23:46, 7.20f
# datcnv_in = R:\DWH_Data\Gordon_Gunter\Cruise_08\DataCollection\CTD\SBE-9\2010_0828\017.dat R:\DWH_Data\Gordon_Gunter\Cruise_08\DataCollection\CTD\SBE-9\2010_0828\017.CON
# datcnv_skipover = 0
# datcnv_ox_hysteresis_correction = no
# datcnv_ox_tau_correction = yes
# wildedit_date = Jan 14 2011 12:24:08, 7.20f
# wildedit_in = R:\DWH_Working\Processed_Data\CTD\Gordon_Gunter\Cruise_08\2010_0828_017\017.cnv
# wildedit_pass1_nstd = 2.0
# wildedit_pass2_nstd = 20.0
# wildedit_pass2_mindelta = 0.000e+000
# wildedit_npoint = 100
# wildedit_vars = t090C prDM sal00
# wildedit_excl_bad_scans = yes
# binavg_date = Jan 14 2011 12:24:26, 7.20f
# binavg_in = R:\DWH_Working\Processed_Data\CTD\Gordon_Gunter\Cruise_08\2010_0828_017\017_edit.cnv
# binavg_bintype = decibars
# binavg_binsize = 1
# binavg_excl_bad_scans = yes
# binavg_skipover = 0
# binavg_surface_bin = no, min = 0.000, max = 0.000, value = 0.000
# file_type = ascii
*END*
    30.2635      3.000     2.4026     4.5856     0.0000     2.3360     0.0000   5.376067      2.980    31.7408  1019.2086    1542.82    5.97780    4.18291 0.0000e+00
    30.2697      4.000     2.5956     5.2463     0.0000     2.4918     0.0000   5.384630      3.973    31.7932  1019.2500    1542.91    6.57660    4.60191 0.0000e+00
    30.2710      5.000     2.6098     4.9832     0.0000     2.5042     0.0000   5.385122      4.966    31.7954  1019.2554    1542.93    6.62136    4.63324 0.0000e+00
    30.2679      6.000     2.6059     5.1359     0.0000     2.4991     0.0000   5.385650      5.959    31.8006  1019.2647    1542.94    6.61057    4.62569 0.0000e+00
    30.2593      7.000     2.5860     5.1446     0.0000     2.4812     0.0000   5.386077      6.953    31.8089  1019.2781    1542.95    6.54989    4.58323 0.0000e+00
    30.2384      8.000     2.5699     5.1963     0.0000     2.4592     0.0000   5.386568      7.946    31.8254  1019.3018    1542.94    6.50255    4.55010 0.0000e+00
    30.2366      9.000     2.5435     5.2463     0.0000     2.4575     0.0000   5.386495      8.939    31.8259  1019.3071    1542.95    6.42134    4.49328 0.0000e+00
    30.1699     10.000     2.4639     5.7174     0.0000     2.3668     0.0000   5.386354      9.932    31.8684  1019.3658    1542.88    6.17988    4.32432 0.0000e+00