* Sea-Bird SBE 9 Data File:
* FileName = C:\CTD\SBE-9\Data\Year_10\GU1004\054.dat
* Software Version Seasave Win32 V 5.39c
* Temperature SN = 0524
* Conductivity SN = 3487
* Number of Bytes Per Scan = 27
* Number of Voltage Words = 3
* Number of Scans Averaged by the Deck Unit = 1
* System UpLoad Time = Sep 04 2010 22:50:59
* NMEA Latitude = 27 59.91 N
* NMEA Longitude = 089 00.17 W
* NMEA UTC (Time) = Sep 04 2010  22:50:52
* Store Lat/Lon Data = Add to Header Only
** Ship:   GORDON GUNTER
** Cruise: 1004
** Station:    054
** Latitude:   27 59.933N
** Longitude:  089 00.176W
** Cast: 01
** SEAMAP Station Number: B083
** Operator's Initials: AFM
** Depth (meters): 1288.5
** EK60 1288m
# nquan = 17
# nvalues = 0                                     
# units = specified
# name 0 = t090C: Temperature [ITS-90, deg C]
# name 1 = prDM: Pressure, Digiquartz [db]
# name 2 = sbeox0V: Oxygen raw, SBE 43 [V]
# name 3 = wetStar: Fluorescence, WET Labs WETstar [mg/m^3]
# name 4 = v1: Voltage 1
# name 5 = v2: Voltage 2
# name 6 = v3: Voltage 3
# name 7 = c0S/m: Conductivity [S/m]
# name 8 = depSM: Depth [salt water, m]
# name 9 = sal00: Salinity, Practical [PSU]
# name 10 = density00: Density [density, Kg/m^3]
# name 11 = svCM: Sound Velocity [Chen-Millero, m/s]
# name 12 = sbeox0Mg/L: Oxygen, SBE 43 [mg/l]
# name 13 = sbeox0ML/L: Oxygen, SBE 43 [ml/l]
# name 14 = scan: Scan Count
# name 15 = nbf: Bottles Fired
# name 16 = flag:  0.000e+00
# interval = seconds: 0.0416667
# start_time = Sep 04 2010 22:50:52
# bad_flag = -9.990e-29
# <Sensors count="11" >
#   <sensor Channel="1" >
#     <!-- Frequency 0, Temperature -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>0524</SerialNumber>
#       <CalibrationDate>15 jul 2010</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.36427749e-003</G>
#       <H>6.34567918e-004</H>
#       <I>2.12958443e-005</I>
#       <J>1.88147563e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="2" >
#     <!-- Frequency 1, Conductivity -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>3487</SerialNumber>
#       <CalibrationDate>15 jul 2010</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-9.89060332e+000</G>
#         <H>1.49272282e+000</H>
#         <I>-1.33234489e-003</I>
#         <J>1.77941691e-004</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="3" >
#     <!-- Frequency 2, Pressure, Digiquartz with TC -->
#     <PressureSensor SensorID="45" >
#       <SerialNumber>0916</SerialNumber>
#       <CalibrationDate>21 jul 2010</CalibrationDate>
#       <C1>-4.112913e+004</C1>
#       <C2>9.700870e-002</C2>
#       <C3>1.190660e-002</C3>
#       <D1>3.551800e-002</D1>
#       <D2>0.000000e+000</D2>
#       <T1>2.991477e+001</T1>
#       <T2>-3.112270e-004</T2>
#       <T3>4.015030e-006</T3>
#       <T4>3.176540e-009</T4>
#       <Slope>1.00002000</Slope>
#       <Offset>-0.60510</Offset>
#       <T5>0.000000e+000</T5>
#       <AD590M>1.280470e-002</AD590M>
#       <AD590B>-9.538050e+000</AD590B>
#     </PressureSensor>
#   </sensor>
#   <sensor Channel="4" >
#     <!-- Frequency 3, Temperature, 2 -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>5039</SerialNumber>
#       <CalibrationDate>15 jul 2010</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.34468855e-003</G>
#       <H>6.37243535e-004</H>
#       <I>2.13522776e-005</I>
#       <J>1.90552521e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="5" >
#     <!-- Frequency 4, Conductivity, 2 -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>3497</SerialNumber>
#       <CalibrationDate>15 jul 2010</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-1.00538186e+001</G>
#         <H>1.54551771e+000</H>
#         <I>-2.45304282e-003</I>
#         <J>2.75093949e-004</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="6" >
#     <!-- A/D voltage 0, Oxygen, SBE 43 -->
#     <OxygenSensor SensorID="38" >
#       <SerialNumber>1904</SerialNumber>
#       <CalibrationDate>24 jul 2010</CalibrationDate>
#       <Use2007Equation>0</Use2007Equation>
#       <CalibrationCoefficients equation="0" >
#         <!-- Coefficients for Owens-Millard equation. -->
#         <Boc>0.0000</Boc>
#         <Soc>5.0350e-001</Soc>
#         <offset>-0.4802</offset>
#         <Pcor>1.35e-004</Pcor>
#         <Tcor>-0.0007</Tcor>
#         <Tau>0.0</Tau>
#       </CalibrationCoefficients>
#       <CalibrationCoefficients equation="1" >
#         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and later. -->
#         <Soc>4.5930e-001</Soc>
#         <offset>-0.6346</offset>
#         <A>-8.4553e-003</A>
#         <B> 3.6898e-004</B>
#         <C>-4.3842e-006</C>
#         <D0> 2.5826e+000</D0>
#         <D1> 1.92630e-004</D1>
#         <D2>-4.64800e-002</D2>
#         <E> 3.6000e-002</E>
#         <Tau20> 1.7800</Tau20>
#         <H1>-3.3000e-002</H1>
#         <H2> 5.0000e+003</H2>
#         <H3> 1.4500e+003</H3>
#       </CalibrationCoefficients>
#     </OxygenSensor>
#   </sensor>
#   <sensor Channel="7" >
#     <!-- A/D voltage 1, Free -->
#   </sensor>
#   <sensor Channel="8" >
#     <!-- A/D voltage 2, Oxygen, SBE 43, 2 -->
#     <OxygenSensor SensorID="38" >
#       <SerialNumber>1893</SerialNumber>
#       <CalibrationDate>24 jul 2010</CalibrationDate>
#       <Use2007Equation>0</Use2007Equation>
#       <CalibrationCoefficients equation="0" >
#         <!-- Coefficients for Owens-Millard equation. -->
#         <Boc>0.0000</Boc>
#         <Soc>4.5870e-001</Soc>
#         <offset>-0.4615</offset>
#         <Pcor>1.35e-004</Pcor>
#         <Tcor>0.0002</Tcor>
#         <Tau>0.0</Tau>
#       </CalibrationCoefficients>
#       <CalibrationCoefficients equation="1" >
#         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and later. -->
#         <Soc>5.0470e-001</Soc>
#         <offset>-0.4935</offset>
#         <A>-3.7372e-003</A>
#         <B> 2.2198e-004</B>
#         <C>-4.3452e-006</C>
#         <D0> 2.5826e+000</D0>
#         <D1> 1.92630e-004</D1>
#         <D2>-4.64800e-002</D2>
#         <E> 3.6000e-002</E>
#         <Tau20> 1.3100</Tau20>
#         <H1>-3.3000e-002</H1>
#         <H2> 5.0000e+003</H2>
#         <H3> 1.4500e+003</H3>
#       </CalibrationCoefficients>
#     </OxygenSensor>
#   </sensor>
#   <sensor Channel="9" >
#     <!-- A/D voltage 3, Free -->
#   </sensor>
#   <sensor Channel="10" >
#     <!-- A/D voltage 4, Transmissometer, Chelsea/Seatech/WET Lab CStar -->
#     <TransChelseaSeatechWetlabCStarSensor SensorID="59" >
#       <SerialNumber>CST-427PR</SerialNumber>
#       <CalibrationDate>25-Mar-2010</CalibrationDate>
#       <M>23.1273</M>
#       <B>-1.2951</B>
#       <PathLength>0.250</PathLength>
#     </TransChelseaSeatechWetlabCStarSensor>
#   </sensor>
#   <sensor Channel="11" >
#     <!-- A/D voltage 5, Fluorometer, WET Labs WETstar -->
#     <FluoroWetlabWetstarSensor SensorID="21" >
#       <SerialNumber></SerialNumber>
#       <CalibrationDate>4-Feb-2010</CalibrationDate>
#       <ScaleFactor>14.900</ScaleFactor>
#       <Vblank>0.058</Vblank>
#     </FluoroWetlabWetstarSensor>
#   </sensor>
# </Sensors>
# datcnv_date = Jan 19 2011 13:54:42, 7.20f
# datcnv_in = R:\DWH_Data\Gordon_Gunter\Cruise_08\DataCollection\CTD\SBE-9\2010_0904\054.dat R:\DWH_Data\Gordon_Gunter\Cruise_08\DataCollection\CTD\SBE-9\2010_0904\054.CON
# datcnv_ox_hysteresis_correction = no
# datcnv_ox_tau_correction = yes
# datcnv_bottle_scan_range_source = BL file
# datcnv_scans_per_bottle = 49
*END*