* Sea-Bird SBE 9 Data File:
* FileName = C:\CTD\SBE-9\Data\Year10\PC1003\PC-10-05\168.hex
* Software Version Seasave V 7.20a
* Temperature SN = 5012
* Conductivity SN = 3483
* Number of Bytes Per Scan = 31
* Number of Voltage Words = 4
* Number of Scans Averaged by the Deck Unit = 1
* System UpLoad Time = Aug 31 2010 00:30:48
* NMEA Latitude = 27 16.24 N
* NMEA Longitude = 089 39.87 W
* NMEA UTC (Time) = Aug 30 2010  00:30:47
* Store Lat/Lon Data = Append to Every Scan
** Ship: PISCES
** Cruise: PC1005
** Station: 168
** Cast: 01
** SEAMAP Station Number:
** Operators Initials: ma
** Depth (m) : 2009
# nquan = 18
# nvalues = 0                                     
# units = specified
# name 0 = t090C: Temperature [ITS-90, deg C]
# name 1 = prDM: Pressure, Digiquartz [db]
# name 2 = sbeox0V: Oxygen raw, SBE 43 [V]
# name 3 = flCUVA: Fluorescence, Chelsea UV Aquatracka [ug/l]
# name 4 = flECO-AFL: Fluorescence, WET Labs ECO-AFL/FL [mg/m^3]
# name 5 = v1: Voltage 1
# name 6 = v2: Voltage 2
# name 7 = v3: Voltage 3
# name 8 = c0S/m: Conductivity [S/m]
# name 9 = depSM: Depth [salt water, m]
# name 10 = sal00: Salinity, Practical [PSU]
# name 11 = density00: Density [density, Kg/m^3]
# name 12 = svCM: Sound Velocity [Chen-Millero, m/s]
# name 13 = sbeox0Mg/L: Oxygen, SBE 43 [mg/l]
# name 14 = sbeox0ML/L: Oxygen, SBE 43 [ml/l]
# name 15 = scan: Scan Count
# name 16 = nbf: Bottles Fired
# name 17 = flag:  0.000e+00
# interval = seconds: 0.0416667
# start_time = Aug 30 2010 00:30:47
# bad_flag = -9.990e-29
# <Sensors count="11" >
#   <sensor Channel="1" >
#     <!-- Frequency 0, Temperature -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>5012</SerialNumber>
#       <CalibrationDate>30-Dec-09</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.36777253e-003</G>
#       <H>6.40445718e-004</H>
#       <I>2.14944115e-005</I>
#       <J>1.83208139e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="2" >
#     <!-- Frequency 1, Conductivity -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>3483</SerialNumber>
#       <CalibrationDate>29-Dec-09</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-1.04344819e+001</G>
#         <H>1.61087312e+000</H>
#         <I>-3.09620216e-003</I>
#         <J>3.25238851e-004</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="3" >
#     <!-- Frequency 2, Pressure, Digiquartz with TC -->
#     <PressureSensor SensorID="45" >
#       <SerialNumber>0911</SerialNumber>
#       <CalibrationDate>30-Dec-09</CalibrationDate>
#       <C1>-2.587222e+004</C1>
#       <C2>2.370877e-001</C2>
#       <C3>7.050890e-003</C3>
#       <D1>3.765600e-002</D1>
#       <D2>0.000000e+000</D2>
#       <T1>3.019020e+001</T1>
#       <T2>-8.056092e-005</T2>
#       <T3>3.301530e-006</T3>
#       <T4>4.207640e-009</T4>
#       <Slope>1.00005000</Slope>
#       <Offset>-0.81730</Offset>
#       <T5>0.000000e+000</T5>
#       <AD590M>1.268100e-002</AD590M>
#       <AD590B>-8.821750e+000</AD590B>
#     </PressureSensor>
#   </sensor>
#   <sensor Channel="4" >
#     <!-- A/D voltage 0, Oxygen, SBE 43 -->
#     <OxygenSensor SensorID="38" >
#       <SerialNumber>0105</SerialNumber>
#       <CalibrationDate>01-Sep-09</CalibrationDate>
#       <Use2007Equation>1</Use2007Equation>
#       <CalibrationCoefficients equation="0" >
#         <!-- Coefficients for Owens-Millard equation. -->
#         <Boc>0.0000</Boc>
#         <Soc>0.0000e+000</Soc>
#         <offset>0.0000</offset>
#         <Pcor>0.00e+000</Pcor>
#         <Tcor>0.0000</Tcor>
#         <Tau>0.0</Tau>
#       </CalibrationCoefficients>
#       <CalibrationCoefficients equation="1" >
#         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and later. -->
#         <Soc>3.8270e-001</Soc>
#         <offset>-0.6370</offset>
#         <A>-4.0574e-003</A>
#         <B> 2.3626e-004</B>
#         <C>-4.1595e-006</C>
#         <D0> 2.5826e+000</D0>
#         <D1> 1.92630e-004</D1>
#         <D2>-4.64800e-002</D2>
#         <E> 3.6000e-002</E>
#         <Tau20> 1.9300</Tau20>
#         <H1>-3.3000e-002</H1>
#         <H2> 5.0000e+003</H2>
#         <H3> 1.4500e+003</H3>
#       </CalibrationCoefficients>
#     </OxygenSensor>
#   </sensor>
#   <sensor Channel="5" >
#     <!-- A/D voltage 1, Free -->
#   </sensor>
#   <sensor Channel="6" >
#     <!-- A/D voltage 2, Fluorometer, Chelsea UV Aquatracka -->
#     <FluoroChelseaUV_AquaSensor SensorID="7" >
#       <SerialNumber>10-7641-001</SerialNumber>
#       <CalibrationDate>8/16/2010</CalibrationDate>
#       <A>0.001006</A>
#       <B>0.082161</B>
#     </FluoroChelseaUV_AquaSensor>
#   </sensor>
#   <sensor Channel="7" >
#     <!-- A/D voltage 3, Free -->
#   </sensor>
#   <sensor Channel="8" >
#     <!-- A/D voltage 4, Fluorometer, WET Labs ECO-AFL/FL -->
#     <FluoroWetlabECO_AFL_FL_Sensor SensorID="20" >
#       <SerialNumber>FLCDRTD-1927</SerialNumber>
#       <CalibrationDate>6/22/2010</CalibrationDate>
#       <ScaleFactor>2.50000000e+001</ScaleFactor>
#       <Vblank>0.0620</Vblank>
#     </FluoroWetlabECO_AFL_FL_Sensor>
#   </sensor>
#   <sensor Channel="9" >
#     <!-- A/D voltage 5, Free -->
#   </sensor>
#   <sensor Channel="10" >
#     <!-- A/D voltage 6, Free -->
#   </sensor>
#   <sensor Channel="11" >
#     <!-- A/D voltage 7, Free -->
#   </sensor>
# </Sensors>
# datcnv_date = Sep 01 2010 13:11:07, 7.20f
# datcnv_in = R:\DWH_Data\Pisces\Cruise_04\DataCollection\CTD\2010_0830\2010_0831_PC168\168.hex R:\DWH_Data\Pisces\Cruise_04\DataCollection\CTD\2010_0830\2010_0831_PC168\168.XMLCON
# datcnv_ox_hysteresis_correction = yes
# datcnv_ox_tau_correction = yes
# datcnv_bottle_scan_range_source = BL file
# datcnv_scans_per_bottle = 49
*END*