* Sea-Bird SBE 9 Data File:
* FileName = H:\ctd\WS1010-STA-71-A.hex
* Software Version Seasave V 7.18
* Temperature SN = MTG#177
* Conductivity SN = MTG#052-1847
* Number of Bytes Per Scan = 40
* Number of Voltage Words = 5
* Number of Scans Averaged by the Deck Unit = 1
* System UpLoad Time = Jun 05 2010 07:35:45
* NMEA Latitude = 28 44.58 N
* NMEA Longitude = 088 20.84 W
* NMEA UTC (Time) = Jun 05 2010  07:34:50
* Store Lat/Lon Data = Append to Every Scan
** Ship: R/V FG Walton Smith
** Florida Straits Cable Calibration
** WS1009 - May 2010
# nquan = 16
# nvalues = 0                                     
# units = specified
# name 0 = t090C: Temperature [ITS-90, deg C]
# name 1 = prDM: Pressure, Digiquartz [db]
# name 2 = sbeox0V: Oxygen raw, SBE 43 [V]
# name 3 = v1: Voltage 1
# name 4 = v2: Voltage 2
# name 5 = v3: Voltage 3
# name 6 = c0S/m: Conductivity [S/m]
# name 7 = depSM: Depth [salt water, m]
# name 8 = sal00: Salinity, Practical [PSU]
# name 9 = density00: Density [density, Kg/m^3]
# name 10 = svCM: Sound Velocity [Chen-Millero, m/s]
# name 11 = sbeox0Mg/L: Oxygen, SBE 43 [mg/l]
# name 12 = sbeox0ML/L: Oxygen, SBE 43 [ml/l]
# name 13 = scan: Scan Count
# name 14 = nbf: Bottles Fired
# name 15 = flag:  0.000e+00
# interval = seconds: 0.0416667
# start_time = Jun 05 2010 07:34:50
# bad_flag = -9.990e-29
# <?xml version="1.0" encoding="UTF-8"?>
# <Sensors count="15" >
#   <sensor Channel="1" >
#     <!-- Frequency 0, Temperature -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>MTG#177</SerialNumber>
#       <CalibrationDate>18-Aug-09</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.41199902e-003</G>
#       <H>6.46201840e-004</H>
#       <I>2.34654971e-005</I>
#       <J>2.16596725e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="2" >
#     <!-- Frequency 1, Conductivity -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>MTG#052-1847</SerialNumber>
#       <CalibrationDate>14-AUG-1847</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-4.15850238e+000</G>
#         <H>4.96015678e-001</H>
#         <I>-4.89947603e-004</I>
#         <J>4.80425523e-005</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="3" >
#     <!-- Frequency 2, Pressure, Digiquartz with TC -->
#     <PressureSensor SensorID="45" >
#       <SerialNumber>MTG# 191 SN: 0468</SerialNumber>
#       <CalibrationDate>30-Mar-09</CalibrationDate>
#       <C1>-4.978018e+004</C1>
#       <C2>-7.757032e-002</C2>
#       <C3>1.219580e-002</C3>
#       <D1>4.161500e-002</D1>
#       <D2>0.000000e+000</D2>
#       <T1>3.015642e+001</T1>
#       <T2>-3.654107e-004</T2>
#       <T3>3.582280e-006</T3>
#       <T4>4.222560e-009</T4>
#       <Slope>0.99994000</Slope>
#       <Offset>1.91370</Offset>
#       <T5>0.000000e+000</T5>
#       <AD590M>1.281230e-002</AD590M>
#       <AD590B>-9.378060e+000</AD590B>
#     </PressureSensor>
#   </sensor>
#   <sensor Channel="4" >
#     <!-- Frequency 3, Temperature, 2 -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>MTG#173-2462</SerialNumber>
#       <CalibrationDate>14-Aug-2009</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.35490485e-003</G>
#       <H>6.40467722e-004</H>
#       <I>2.30570981e-005</I>
#       <J>2.21252512e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="5" >
#     <!-- Frequency 4, Conductivity, 2 -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>MTG#060-2745</SerialNumber>
#       <CalibrationDate>14-Aug-09</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-1.01056787e+001</G>
#         <H>1.43552617e+000</H>
#         <I>-1.04450145e-003</I>
#         <J>1.38842052e-004</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="6" >
#     <!-- A/D voltage 0, Oxygen, SBE 43 -->
#     <OxygenSensor SensorID="38" >
#       <SerialNumber>MTG#67-0053</SerialNumber>
#       <CalibrationDate>04-Nov-09</CalibrationDate>
#       <Use2007Equation>1</Use2007Equation>
#       <CalibrationCoefficients equation="0" >
#         <!-- Coefficients for Owens-Millard equation. -->
#         <Boc>0.0000</Boc>
#         <Soc>0.0000e+000</Soc>
#         <offset>0.0000</offset>
#         <Pcor>0.00e+000</Pcor>
#         <Tcor>0.0000</Tcor>
#         <Tau>0.0</Tau>
#       </CalibrationCoefficients>
#       <CalibrationCoefficients equation="1" >
#         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and later. -->
#         <Soc> 0.4118</Soc>
#         <offset>-0.4669</offset>
#         <A>-1.2996e-003</A>
#         <B> 1.0785e-004</B>
#         <C>-2.3457e-006</C>
#         <D0> 2.5826e+000</D0>
#         <D1> 1.9263e-004</D1>
#         <D2>-4.6480e-002</D2>
#         <E> 3.6000e-002</E>
#         <Tau20> 0.9600</Tau20>
#         <H1>-3.3000e-002</H1>
#         <H2> 5.0000e+003</H2>
#         <H3> 1.4500e+003</H3>
#       </CalibrationCoefficients>
#     </OxygenSensor>
#   </sensor>
#   <sensor Channel="7" >
#     <!-- A/D voltage 1, Free -->
#   </sensor>
#   <sensor Channel="8" >
#     <!-- A/D voltage 2, Fluorometer, Wetlab CDOM -->
#     <FluoroWetlabCDOM_Sensor SensorID="19" >
#       <SerialNumber></SerialNumber>
#       <CalibrationDate></CalibrationDate>
#       <ScaleFactor>23.000</ScaleFactor>
#       <Vblank>0.000</Vblank>
#     </FluoroWetlabCDOM_Sensor>
#   </sensor>
#   <sensor Channel="9" >
#     <!-- A/D voltage 3, Free -->
#   </sensor>
#   <sensor Channel="10" >
#     <!-- A/D voltage 4, Altimeter -->
#     <AltimeterSensor SensorID="0" >
#       <SerialNumber>1080</SerialNumber>
#       <CalibrationDate></CalibrationDate>
#       <ScaleFactor>5.000</ScaleFactor>
#       <Offset>0.000</Offset>
#     </AltimeterSensor>
#   </sensor>
#   <sensor Channel="11" >
#     <!-- A/D voltage 5, PAR/Irradiance, Biospherical/Licor -->
#     <PAR_BiosphericalLicorChelseaSensor SensorID="42" >
#       <SerialNumber>4542 mtg # 108</SerialNumber>
#       <CalibrationDate>8-12-09</CalibrationDate>
#       <M>1.00000000</M>
#       <B>0.00000000</B>
#       <CalibrationConstant>2597400000.00000000</CalibrationConstant>
#       <Multiplier>1.00000000</Multiplier>
#       <Offset>-0.00623700</Offset>
#     </PAR_BiosphericalLicorChelseaSensor>
#   </sensor>
#   <sensor Channel="12" >
#     <!-- A/D voltage 6, Fluorometer, Seapoint -->
#     <FluoroSeapointSensor SensorID="11" >
#       <SerialNumber>MTG#195</SerialNumber>
#       <CalibrationDate>12/12/08</CalibrationDate>
#       <!-- The following is an array index, not the actual gain setting. -->
#       <GainSetting>0</GainSetting>
#       <Offset>0.000</Offset>
#     </FluoroSeapointSensor>
#   </sensor>
#   <sensor Channel="13" >
#     <!-- A/D voltage 7, Transmissometer, Chelsea/Seatech/Wetlab CStar -->
#     <TransChelseaSeatechWetlabCStarSensor SensorID="59" >
#       <SerialNumber>cst-487DR -mtg# 211</SerialNumber>
#       <CalibrationDate>28 October 2009</CalibrationDate>
#       <M>21.7170</M>
#       <B>-1.2200</B>
#       <PathLength>0.250</PathLength>
#     </TransChelseaSeatechWetlabCStarSensor>
#   </sensor>
#   <sensor Channel="14" >
#     <!-- SPAR voltage, Unavailable -->
#   </sensor>
#   <sensor Channel="15" >
#     <!-- SPAR voltage, SPAR/Surface Irradiance -->
#     <SPAR_Sensor SensorID="51" >
#       <SerialNumber>MTG#2479-20355</SerialNumber>
#       <CalibrationDate>8/13/09</CalibrationDate>
#       <ConversionFactor>1612.20000000</ConversionFactor>
#       <RatioMultiplier>1.00000000</RatioMultiplier>
#     </SPAR_Sensor>
#   </sensor>
# </Sensors>
# datcnv_date = Jun 30 2010 09:45:49, 7.20d
# datcnv_in = R:\DWH_Data\Walton_Smith\Cruise_02\Data_Collection\CTD\2010_0605_WS71A\WS1010-STA-71-A.hex R:\DWH_Data\Walton_Smith\Cruise_01\DataCollection\CTD_calibration\WS1010-v3.CON
# datcnv_ox_hysteresis_correction = yes
# datcnv_ox_tau_correction = yes
# datcnv_bottle_scan_range_source = BL file
# datcnv_scans_per_bottle = 49
*END*